So i started to work on the idea I had about the bubble wrap image idea, I managed to acquire some syringes, a decent sized bubble wrap sheet and some blue ink. This process involved in making this in theory wasn't hard but I learned quickly the faults I had failed to think of, Firstly I failed to consider what size bubbles would be most appropriate, the problem this caused was if the bubble sizes were too big the ink began to diffuse this caused the message to be very faint and hard to see or read, If the bubbles were to small the pressure of having something injected into them was a bit to high and upon removing the syringe the ink would jet out. Secondly I should have considered what ink to use, i was having major problems with the type of ink being used, in my pots (shown below) the dyed water was very consistent until about 20 minutes in when the ink began to rise to the top and the water below it, so when i tried to extract a good amount of coloured water I pulled out only water basically.
I have decided to not pursue this idea further because it was giving me too much trouble with almost no pay off, as you can see below of what i got done it is hard to read and the bubbles are far to spread apart to even being trying to decipher the text.
No comments:
Post a Comment